Feature

●Diameter (before shrinking): 0.02 inches (0.6 mm); Length (approximate): 3.3 ft (1 m); Shrinkage Rate: 2:1
●Operating Temperature: -55? 125℃; Flame Retardant: VW-1, Flame Retardant
●Minimum Shrinkage Temp: +70℃; Full Shrinkage Temp: <125℃
●Heat Shrink Tubing is ideal for wire and wire harness wrapping that is protected even in harsh environments.
●You can customize it at home to meet your needs and solve your problem in minutes.


Description

Description:
This heat shrink tubing is ideal for wire connections, solder splicing protection, connector seals, group line markings, resistance electrical capacity insulation protection.
Features:
- Corrosion resistant
- Good electrical insulation
- High strength toughness
- High temperature resistant
- Water resistant
- Long life
How to use:
1.Choose the correct size tube Measure the diameter of the wire/cable you want to wrap, and make sure the diameter is equal to the size of the tube after heating, the tube will shrink to 1/2 of the original diameter.
2. Wrap the wire with the tube. Cut out the desired length, wrap the wire with the tube, then use a lighter, hair dryer or heat gun to heat the tube.
3. Heat the tube until the wire fits tightly.
Note:
Be careful while using a lighter or heat gun.
- Keep away from children while heating.
Standard:
Material: Polyethylene.
Shrinkage Ratio: 2:1 (will shrink to 1/2 of the supplied diameter)
Minimum shrink temperature: + 154°F (70°C).
Full Shrink Temperature: +125 degrees Celsius
Operating Temperature: -55? 125℃
Rated Voltage: 1000 V
Pressure Resistance: 1 KV
Flame retardant: VW-1, flame retardant
Shape: Round/Flat