Feature

●Diameter (before shrinking): 14mm; Flat Width: 23mm; Length (Approx.): 10M; Shrinkage Rate: 2:1
●Operating Temperature: -55 to 125 degrees Celsius; Flammability: VW-1, Flame Retardant
●Minimum Shrinkage Temp: +70℃; Full Shrinkage Temp: +125℃ Max
●Heat Shrink Tubing is very convenient in the specifications of superior electrical insulation, corrosion resistance, and high temperature resistance
●Wide application: electrical insulation, wire protection, cable bonding, data cable decoration, color coding, wire marking, wire band ring etc


Description

Features:
- Corrosion resistant
- Good electrical insulation
- High strength toughness

- High temperature resistance
- Waterproof
- Long life

How to use:

1.Select the appropriate size tube Please measure the diameter of the wire/cable you want to wrap and make sure the diameter is the same as the size of the heat shrink tube after shrinking. Tubes shrink to 1/2 of their original diameter after heating.
2. Wrap the wire in the tube. Cut the length you need, wrap the wire in the tube, then use a lighter, hair dryer or heat gun to heat the tube.
3. Heat the tube until the wire is firmly fixed.

Note:
- Be careful when using a lighter or heat gun.
- Not intended for heating

Specifications:

Material: Polyethylene
Shrinkage Ratio: 2:1 (will shrink to 1/2 of the supplied diameter)
Minimum Shrinkage Temperature: +70 ℃
Full Shrinkage Temperature: +125 ℃ (Max)

Operating Temperature: -55 ~ 125 ℃
Rated Voltage: 1000V
Dielectric Strength: 1 KV
Flame retardant: VW-1, flame retardant
Item Shape: Round/Flat