Feature

●Diameter (before shrinking): 0.03 inches (0.8 mm); Length (approx.): 3.3 ft (1 m); Shrinkage Rate: 2:1
●Operating Temperature: -55-125°C; Flame Retardant:VW-1, Flame Retardant
●Minimum Shrinkage Temp: +70°C; Full Shrinkage Temp: +125℃
●Heat shrink tubing is ideal for wire and wire harness wrapping that is protected even in harsh environments.
●Customize it at home to suit your needs and solve the problem in minutes.


Description

Description:
This heat shrink tubing is great for wire connection, solder joint protection, connector seal, groupline marking, resistive capacity insulation protection, etc.
Features:
- Corrosion resistant
- Good electrical insulation
- High strength toughness
- High temperature resistant
- Water resistant
- Long life
How to Use:
1. Please select the correct size tube. Measure the diameter of the wire/cable you want to wrap and make sure the diameter is equal to the size of the tube after shrinkage as the tube after heating.
2.Wrap the wire with a tube. Cut out the length you need, wrap the wire with a tube, and heat the tube using a lighter, hair dryer or heat gun.
3. Heat the tube until the wire is firmly in place.
Note:
Be careful while using a lighter or heat gun.
- Keep away from children while heating.
Standard:
Material: Polyethylene
Shrinkage Rate: 2:1 (will shrink to 1/2 of the supplied diameter).
Minimum Shrinkage Temperature: + 154°F (70°C).
Full Shrink Temp: +125 Celsius
Operating Temperature: -55 ? 125°C
Rated Voltage: 1000 V
Voltage: 1KV
Flame Retardant: VW-1, flame retardant
Shape:Round/Flat