Feature

●Value Pack Economical bottle case for easy access
●Comes with metal tip. Cross can easily pass through. Even if the screw passes through, the tip hardware will not fall off
●No drilling required. Screwdriver installation
●Compatible with 4mm screws. Long screws can be used (25 mm or higher)
●Up to 0.6 inch (15 mm) thick for gypsum boards. Do not use with impact drivers


Description

Manufacturer: Jefcom
Model Number: TP-TO-525
Product Name: Value Pack for Plaster Boards with Chip
Compatible screw size: φ0.16 in (4.0 mm) (traspping screw)
Plastic auger with chip: φ0.5 x 1.0 inches (14 x 25 mm)
Trapping screw size: φ0.2 x 1.0 inches (4 x 25 mm)
● Maximum Pulling Strength:
Plaster board 0.6 inch (15 mm) thickness: 71.1 N (7.2 kgf), safety rate N = 7
Plaster board 0.5 inch (12.5 mm) thickness: 43.8 N (4.5 kgf), safety rate N = 7
Plaster board 0.37 inch (9.5 mm) thickness: 16.3 N (1.7 kgf), safety rate N=14
The maximum pulling strength will vary depending on the materials used and construction conditions. Please note that this is not a guaranteed load.
Quantity: 110 pieces each (number of plastic augers with chip and traspping screws)

[Use]
Brackets, power distribution boards, lighting fixtures, electrical pipe
Curtain rods, related devices such as phones, bulletin boards, etc.