Feature

●Short type with extra short 0.9 inch (24 mm). The white color that blends in with wallpaper even after removing the appliance (top surface only)
●Ideal for GL construction where the gap between concrete walls and drywall
●No drilling required. One screwdriver can be installed (If the thickness of the plaster board is less than 0.5 inch (12.5 mm). With a thickness that exceeds 0.5 inches (12.5 mm) and multiple plaster boards, please open the hole (φ6.3 - 6.5 mm) through with a screwdriver. )
●Lock and lock while cutting into base material ● "Folded Forward" type allows long screws
●Do not use with impact drivers


Description

Manufacturer: Jefcom
Model Number: SO-425ZP
Product Name: Short Ogre
Material: Zinc alloy
Compatible screw size: φ4.0 mm (tapping screws)
Short auger size: φ0.5 x 0.9 inches (13 x 24 mm)
Trapping screw size: φ0.2 x 1.0 inches (4 x 25 mm)
● Maximum Pulling Strength:
Plaster board 0.5 inch (12.5 mm) thickness and above: 29.4 N (3.0 kgf) safety rate N=7
Plaster board thickness: 0.37 inch (9.5 mm) and above: 14.7N (1.5 kgf), Safety Factor: N=14
The maximum pulling strength will vary depending on the materials used and construction conditions. Please note that this is not a guaranteed load.
Type: Pack
Quantity: 37 each (number of short-auger and tras-tapping screws)

[Use]
Brackets, power distribution boards, lighting fixtures, conduit pipes, cables, racks
Curtain rods, related devices such as phones, bulletin boards, etc.