Feature

●Thickness: 0.1 inch (3 mm).
●Thread part: Parallel [Pitch: Approx. 0.02 inches (0.5 mm))
●Note in the product image) This is the representative size image. The length of each part such as engraving, thread and pitch, will vary depending on the size.
●Note: Please check the diagram to confirm the size.

[M18]



[M3]



[M5]



[M6]



[M8]



[M10]




Description

■Shape: Hex nut (with nylon ring)

Hex nut for loosening and a nylon ring attached to the top is pressed to the screw part such as bolts to create friction for a loosening effect.
Tighten using tools such as a spanner or wrench.
■ Thread Shape: Coarse

It is the most standard pitch in Japan as defined by ISO (International Organization for Standardization) standards. It is the highest distribution rate in Japan.
■Material: Iron

"Iron" is "steel". Steel is an alloy of iron that contains less than 2% carbon
It is generally widely distributed and is inexpensive but due to the fact that it is easy to rust, many of which it reduces corrosion due to surface treatment.
■Surface treatment: Trivalent White

It has the same corrosion resistance as "chromate" and has imitation self-healing.
Unlike hexavalent chrome, it is harmless and compatible with RoHS Directive. Therefore, it is used as a replacement for unichro/chromate.
The color is silver color.
Product Features:

Shape:
A nylon ring is attached to the exit of the nut.
Nylon material is 66 nylon.

Features
When tightening the nuts, male screws are made in the nylon ring, and the friction of the part of the product may cause
Provides a loosening effect.
Reduces torque decreases even after repeated use.
Made of nylon, so it will not scratch your bolts.
Can be used from -40°C to 120°C.