Feature

●Thickness = 0.3 inch (8 mm)
●Thread part = Coarse [Pitch: Approx. 0.05 inch (1.25 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size.
●Note: Please be sure to check the drawing for the size and other items.

[M5]



[M6]



[M8]



[M10]




Description

■Shape: Hex nut (with nylon ring)

Hex nut for loosening and a nylon ring on the top is pressed into the screw section such as bolts to create friction and loosening effect.
Use a tool such as a spanner or wrench to tighten it.
■ Thread Shape: Coarse

It is the most standard pitch in Japan as prescribed by ISO (International Organization for Standardization) standard. The most frequent distribution in Japan.
■Material: Iron

Iron is steel. Steel is an alloy of iron containing less than 2% carbon.
Although it is commonly used in many circulations, it is cheap materials, but due to the downside of it is easy to rust, many surface treatments will reduce corrosion.
■Surface treatment: fabric

Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.
Product Features:

Shape
The nut has been made with nylon rings on the exit side.
Nylon material is 66 nylon.

Features
When tightening the nut, male screws are made on the nylon ring, and the friction of the part causes
It will prevent loosening effect.
Less torque decreased even after repeated use.
● Nylon so it will not damage the bolts.
Can be used from -40 to -120 degrees Celsius.