Feature

●Includes 4 x 25 screws With 0.2 inch (4 mm) screws, you can use it with unlimited lengths
●Zinc die-cast body firmly treads to the components
●The total length is 1.0 inch (25 mm), so it is useful in the field of narrow GL manufacturing method
●It boasts an overwhelming load capacity
●Can be used on a variety of materials other than gypsum boards

[(21 blister packs)]




[(1 piece in simple packaging)]




[(Individual box contains 1000 pieces)]




[(300 bottles in a box)]





Description

The usual board anchor "Valeme-chan" has been collected.

Board Anchor, Jotetsu Mibu-kun, Mini Iron SaburoBoard Anchor, Jotetsu Mibu-kun, Mini Iron Saburo

Base plate, air vibration, screws are not active, hollowing, boardBase plate, air vibration, screws are not active, hollowing, board

Bit, screwdriver, impact, electric dollar, electric drill, electric drillBit, screwdriver, impact, electric dollar, electric drill, electric drill

The usual board anchor "Valreme-chan"

The total length of about 1.0 inch (25 mm), so it can be used in narrow walls.In particular, it is pleased by the GL construction site.

The zinc die-cast body is strenched in places where the screws are not effective.

The pitch of the anchor is not a mess, so it is extremely easy to use.

Can be used with other than the included 4mm screws.

Even with the pulling load.

6. Does not spin around when removing screws. You can use it again!!

You wont have to worry about installing the fixtures...

I thought there was a foundation...

Have you ever had this experience??

Valeme-chan is a great choice for air shaving and where screws are difficult to work.

No special tools required! You can use your usual screwdriver.

No hassle preparation is required.

If you have your usual driver and Valeme-chan, you can do it.

Just screw in places where screws do not work or hard.

Opening, screwed, board anchor, screw anchorOpening, screwed, board anchor, screw anchor

Exhibitions, Weights and Board Anchors, Jotetsu, Mibu-kunExhibitions, Weights and Board Anchors, Jotetsu, Mibu-kun

Board anchor, coaxial, aerationBoard anchor, coaxial, aeration

Works great with short screws or long screws.

The Toreme-chan comes with 4 x 25 screws, but the other 0.2 inch (4 mm) thick screws can be used with short screws or long screws.

The long screw screws are screwed into to ensure that your feet are open at its hardest.

Please check the overwhelming load capacity.

With a small amount of 0.2 inch (4 mm) biss, you can lift more than 22.0 lbs (10 kg).

Not only does it work like a crunchy effect.

It is also extremely difficult for the "screws and board anchors to spin together" that is common when removing screws from the board anchor, and it is extremely easy to use.