Accessories:
1M Power Cable (White)
Surface mounts NTC Thermistor 100K + 1 meter extension wire (Red)
3M adhesive backing
4 pre-made screw holes as shown
Important Note:
Heat only after it is installed on the build plate (aluminum plate is recommended).
Features:
Strong sound insulation and absorption performance, heat insulation, attenuation and disinfection
Description:
Size:200mmx200mmx10mm
Installation Notes:
1.Clean the surface to be installed.
2. Heat insulation and sheet metal create a secure fit for the best adhesion and attenuation performance.
3. Please do not install the chassis wiring or air holes in the chassis
4. Proper use of the adhesive tape will enhance the effect of the connection.
5. Paste the aluminum soundproofing/dampening plate, you can use a hair dryer to make it soft and compress by hand. The room temperature is less than 5 degrees Celsius while the first solar lamp is heated to a soft till it is soft. Then remove the wax paper and paste it
6. The installation process is not the best for repeated tear-paste paste and the effect will not be destroyed.
7. Heat retention can be applied to several hidden places.
Package includes:
1 x Silicone Heater Pad
1 x Insulated Cotton
Note:
Cotton is easy to fold, and it is soft, but if you care about it, do not affect the order.
If you have any questions, please feel free to contact us.