Benefits:
More than this 3M masking tape
More Adhesive STIC
More ABS juice
Replacement for more PEI seats
Easy to print
Easy to bend and pop it off
Easy to maintain
Double Sided
For printing farms, especially costs run down
Genuine PEI powder coating
Hardened Steel Spring Sheet Never diforming
Add the possible induction Z-probe
You can also add ABLs for some low-cost printers
Size:
220x220mm
Material Compatibility:
PLA ABS PETG TPU PVA etc.
Printer Compatibility:
220x220mm for Annet A8 A6 Wanhao I3
Flex Plate Installation and Pulse Printer
Magnet base for similar bed size printer
Maintenance:
Wipe the printed surface with isopropyl alcohol to maintain a clean surface for maximum bed bond strength. As with any build surface, it is not printed on a bed too close to avoid the chance of filament injecting into the building surface. When printing PETG, TPU, TPE and RYNO, make sure the bed is heated before attempting to remove the print from the bed.
Print Reference Temperature:
1.PLA:
Hot bed: 140 - 156°F (60 - 75°C).
Nozzle: 200-210°C
2. ABS:(Not suitable for use)
HOT BED:
Nozzle: 240-250°C
3.PETG:
Hot bed: 154 - 198°F (70 - 90°C).
Nozzle: 240-250°C
5.TPU:
Hot bed: 120 - 140°F (50 - 60°C).
Nozzle: 200-220°C
6.Wood:
Hot bed: 140 - 176°F (60 - 80°C).
Nozzle: 200-220°C
Listing Package:
1 x Steel plate
1 x Magnetic Heated Bed
If you have any questions, please feel free to contact us.