Feature
●Other applicable scenarios: electrical curtains, printers, video conferences, educational domes, game consoles, office automation, home automation, child seat, medical pump that requires silent or low-jitter equipment and equipment.
●1. 2560 ramp and 1.4 are integrated into the board to avoid complicated connectors.
●2. Support a variety of stepping drivers as you can change the stepper driver and motor as A4988, DRV8825, TMC2100 and LV8729 as a user
●Available 3. Reserved external drive signals connect external large current drivers to drive 57 and 86 stepping motors.
●4. High quality MOSFET, better cooling and more stable.
[One Size Black]
Description
Stepper Motor Noise Reduction: Easy to hear stepper sound reduction.
Overview:
The aim of the problem is to develop the MKS-GEN L which exists on the open source controller board as a developer in ramp 1.4, specially optimized Makerbase and provides a more flexible choice for the user.
Features:
The stable and reliable filter circuit greatly reduces crash to avoid interference as much as possible in the printing process.
The chip of the CH340 serial port is easier to install drives than 16U2.
The Marlin firmware runs by specifying the file name is the same configuration available to replace ramp 1.4 and directly ramp 1.4.
Support ramp 1.4, 2004LCD, 12864LCD, TFT28 and TFT32
Input 24V, effective heating floor heating MOSFET problem for heated floor current, can be reduced to 1/4 with the same system power.
X-axis, Y, axis and Z, convenient for wire with different color terminal control stepping motor and end stop and axis.
Reduces the chance of reverse and prevents damage to the controller board and plugs in stepping drivers with different color terminals.
MKS-TFT32 Touch Screen
Can be used with MKS Base, MKS Gen, MKS Mini or Motherboard Series.
MKS TFT32 does not support external power supply, can not be used with Ramps1.4.
Features:
1. 3.2 inch full color touch screen support U disk and SD card.
2. Reserved wireless LAN interface, wireless LAN interface can support wireless LAN (package does not include WiFi module).
3. Provide continuous software upgrades, the upgrade method is simple.
4. Can be used with MKS Base, MKS Gen, MKS Mini or Motherboard Series.
5. Master program modification, plug and play, support marine, Repetier, Smoothieware firmware.
6. Support power off when power is off, power save off printing.
7. Does not support serious detection.
8. You can design boot logo and all buttons and other interface.
9. The can will have a custom function button.
Package includes:
1 x V1.0 Board
1 x Touch Screen
1 x USB cable.
1X FC Flat Cable
Service:If you have any question about the product please buy our products.If, please consult our customer service and come to wish you a happy shopping!
It has a USB interface that is easy to connect and operate.