[Crown]

[car]

[simple blue]

[Flower Ribbon]

[girly animal]

No ironing required! Easy name sticker to attach to clothes and accessories.
Smear-proof for clear writing
Pre-cut type with no scissors, so it is easy to use.
The back is sealed so it does not slip off when ironing, so it is safe for people who need to worry about bumps.
Kaken Test Center (wash and dry) tested.

Product Size / Number of Pieces:
Approx. Width 2.2 inches (57 mm) x Height 0.7 inches (18 mm) (square)... 4 pieces
Width 1.8 inches (45 mm) x Height 0.3 inches (8 mm) (square)... 16 pieces
Width approx. 0.7 inches (18 mm) x Height approx. 0.7 inches (18 mm) (square)... 4 pieces
Width approx. 0.7 inches (18 mm) x Height approx. 0.7 inches (18 mm) (Circle) ... 4 pieces
Width: Approx. 0.8 inches (21 mm) x Height: Approx. 0.3 inches (8 mm); 8 pieces (square).
Approx. Width 1.8 inches (45 mm) x Height 0.7 inches (18 mm) (oval shape) ... 4 pieces
Approx. Width 1.1 inches (28 mm) x Height 0.7 inches (18 mm) (oval shape) 4 pieces
Total of 44 sheets.

How to Use: Can be used as a seal, just stick it on.
1. Write your name or any text you like with a permanent pen or fabric ink stamp on the sticker to use.
2. Simply peel off the sticker from the release paper, place it on the desired area, press it hard with your finger and stick it on!
★Iron on and apply more assistance
1. Place a press cloth (100% thin fabric) on the adhesive sticker and iron on a dry medium temperature (240~180℃).
2. Place your weight on the iron and press it for about 15 seconds. When fully cooled, peel off the press cloth.

Fabric: Silk, nylon, acrylic, urethane, polyester, etc. with iron specified at low temperatures.

Precautions for using this product:
Use a permanent pen or pigment ink pen or fabric ink stamp to personalize your name.
Not suitable for use on materials that have been waterproofed or treated with special textures, uneven materials (towels, etc.), stretchable materials (knit products, etc.), long pile materials, rough textures, and seamed materials.
It cannot be peeled off if ironed on. Please be careful.
·When using an iron printing, please use a cloth (thin 100% cotton) to protect the fabric.
Please be sure to peel off the release paper before use.
Keep out of reach of infants.

[Care instructions after ironing printing]
·After printing, please leave it at least half a day before washing.
Please do not dry clean/wash with bleach or wash the product.
Please always use a dehydrator when dehydrating and avoid wring out of hand. Also, please dry immediately at end of drying. (Prevents bleeding and peeling)
If the iron is insufficient heat and strong enough, it will be easy to peel off when washing.
We recommend using a laundry net when washing.
The durability of the print of this product will depend on the fabric applied, the print status, and the type of washing machine.
·Please do not iron directly on this product. Use a cloth when ironing, and use a medium temperature or less.

The seal will be hot during and immediately after ironing. Please be aware that there is a risk of burns.
※We are not responsible for any accidents involved in the use of this product (such as fabric scratches, burns, color transfer, burns, etc.) Please handle with the users responsibility when using this product.