Brand new and unused
This is a collaboration set with OneS&Ms Breather System Kit and G-motos Silencer Stand.
The attachment is CNC machined from high quality aluminum duralumin and anodized aluminum for excellent strength and great for dress-up.
Breather silencer stand supports G-moto 42.7φ50.8φ Multi Silencer Stand Breather Stand
It can be installed in two sizes of 42.7 and 50.8 φ. It has a hook on the top of the main unit for hanging the springs, and a hole for putting 0.2 inch (4 mm) springs.
If you do not use the breather system, you can also use the oil filler cap with a special bolt!
Specifications:
Mesh Hose Total Length: Approx. 31.5 inches (80 cm).
Mesh hose diameter: approx. 0.5 inches (12 mm)
Instructions for Breather Kit Included
Attachment screw size: M16 x L10 x P1.5
Cap Color:
orange
Set Contents:
1 x Breather Attachment
1 x Stainless Steel Breather Silencer Stand
Dedicated banjo bolt x 1
Dedicated banjo attachment x 1
2 x Copper Washers
Mesh hose 31.5 inches (80 cm) x 1
2 x hose bands
Breather Effect
By releasing blow by gases in the air, you can expect increased response (power) by reducing the amount of blow-by-gas fill in the engine.
Installation Notes:
Please refer to the included instruction manual (English language not guaranteed).
The silencer stand has two bolt holes of 0.4 inch (9 mm) (M9) and one 0.5 inch (12 mm) (M12 mm) bolt hole in between the stays, so please remove the bolt once and tighten it from the base of the rear step.
(CBR, remove the bolt on the left side of the rear tandem once to install).
Main Mountable Vehicle
KTM 125DUKE 200DUKE 390DUKE DUKE
RC125 RC200 RC250 RC390
Caution:
Depending on your viewing environment, the color and brightness may differ from those of the actual product.
Breather Kit is a racing part and does not meet any safety standards during air opening, so please remove the banjo ducter and place the oil filler cap when using on public roads or car inspection.
Even if the model listed is not compatible with the year, please check the size of the oil filler cap before purchasing.
Please be aware that there may be small rust (sister only), external storage scratches, small scratches, etc.
Processing may be required for installation, so please install in a shop with expertise.
Silencer spring is not included, so please prepare it separately.
Even if the silencers are 1.7 and 2.0 inches (42.7 and 50.8 mm), please check the inner diameter of your silencer before purchasing.
Product design and specifications may change without prior notice for product improvements.
One sticker color will be random between red or blue.