Speaker units sold separately. Sold Separately! ※
This kit requires drilling of holes (it is cardboard so it is easy to use with ordinary cutters).
This kit is designed to be the same size as the NFJ Custom Enclosure Kit (Model - PLS)) designed based on the "PLS-P830985" unit.
The name of the “Cardboard speaker making kit” is the most important value for cost-performance.
This is a self-made speaker kit that can be easily assembled with your favorite speaker unit and the stationery and tools found anywhere in your home.
When finished, you can complete a pair of compact speakers with 4.1 x 5.5 x 4.8 inches (104 x 140 x 122 mm).
This kit is designed as a standard unit of our most popular full-range unit, Peerless PLS-P830985.
This is an easy kit that even elementary school students can make, making it perfect for summer vacation crafts and free research.
Note about sound quality*
We ask for you in advance, but if you assemble it simply by simply assembling it, sound leaks and box sounds from the gap with low sealing capabilities,
Compared to MDF enclosure, it is a "sound for you".
The main point is “sealing tightly” and “increasing the strength of the box.”
When you finish these two points with an emphasis on creativity, you will get closer to the quality of the enclosure made by MDF.
Kit Contents:
1 x Enclosure Kit Guide Sheet
2 x Enclosure Cardboard "K6·K6"
Bass reforts: Φ1.0 inches (26 mm) x 1.9 inches (48 mm) x 2 pieces.
Terminals: 2 x 2P push terminals
Internal Wiring: Red and Black Wire x 2
Sound Absorbing Material: Needle Felt x 1 sheet (cut in half to use)
Screws (Large) (for securing speakers) x 8
Hex nuts (large) x 8 pieces.
Large washer x 8 pieces.
Screw (for terminals) x 4
Hex nut (small) x 4 pieces.
Washers (small) x 4 pieces.
(*) Screws are for the basic set. When installing speaker units or terminals other than PLS-P830985, please pay attention to the size and quantity of other terminals that are sold separately.
Recommended Standard Design:
Format: Rear Bass Reflex
Finished Size: W 4.2 x D 5.6 x H 4.9 inches (106 x 142 x 124 mm).
Speaker unit: Peerless PLS-P830985
Assembly Instructions:
Please download the assembly manual before using.
Simple assembly manual downloading (PDF files)
http://nfjapan.com/manual/dansupikit.pdf
[Note]
Speaker unit sold separately. Please note that the speaker unit is not included in the set.
Since this product is a self-made kit, the parts need to be processed and assembled.
Assembly requires additional tools such as glue, solder, etc. to be prepared separately.
This is an assembly kit so there is basically no warranty.
·We will respond to replacement if the part has been damaged or faulty at the time of the product arrives.
Product Specifications:
Material: Special design high strength cardboard (K6·K6).
Accessories: Complete set of enclosure DIY kit contents (details are mentioned above).
Speaker unit is not included.
Weight: 6.7 oz (190 g) (Part weight)
Size (W x D x H): 4.2 x 5.6 x 4.8 inches (106 x 142 x 124 mm) (finished size, not including protrusions).