Length 6.7 inches (170 mm) Expanded Water Saving Pipe Display: Expanded Display For Attachment Type Expanded Pipe Adapter Display: Improves ease of use and saves water power when replacing old pipes due to leakage or deterioration, but also changing the length of the pipe changes the position of the water flow just by changing the length of the pipe, making it easier to use. The action of the water saving cap saves approximately 30% of the water. In addition to the insulating cap that stays cool to the touch, the foam reduces water splashes. Compatible with most manufacturers, the most common household uses are 0.6 inch (16 mm) outer diameter pipes, and can be installed on Sanei, TOTOTO, INAX, KVK, MYM, KAKUDAI, TBC, YUKO, and most other mixed faucets and single faucets. However, some TOTO products are not supported. The faucet type pipe that can be installed is for upward orientation, downward only, and shared use, this is a downward type only. Check it first. (Refer to the "Installation Type" diagram) If you use an adapter for 0.7 inch (19 mm) outer diameter pipes, faucets that use an outer diameter of 0.7 inch (19 mm) pipes can be installed using a pipe adapter (PT35-24S sold separately), you can install 0.6 inch (16 mm) pipes. Simply remove the nut with a single spanner and remove the old gasket. Insert the new U-gasket groove toward the side of the faucet (wet with water will make it easier to enter it). Insert the pipe into the faucet body and attach the nut (if the nut does not fit, use the nut while using).

From the Manufacturer

	Insulated pipe	Water saving insulation pipe	Water saving insulation pipe	Insulated upward pipe	Water saving insulation upward pipe	Insulated Swivel Pipe
Length (mm)	170	170	170	220	220	170
Features	Insulated	Heat insulation, water saving	Heat insulation, water saving	Insulated, upward facing	Insulation, water saving, upward facing	Insulates and rotates