Feature

●[Numerical details]: Material: PET, Thickness: 0.05 mm, UV 90%, Visible light transmission rate 96%, Strength: 75lbs/in
●Function: Shatterproof, Clear colorless, UV protection, not affected, indoor shower room, mirror, goldfish bowl, etc.
●Applicable places: high-rise apartments, buildings, museums, museums, banks, transportations, hospitals, offices, shower rooms, goldfish bowls, villa houses, department stores, jewelry stores, glass greenhouses, convenience stores, kindergartens, school schools, educational places, etc.
●Prevent glass shattering due to thieves tear or disaster.
●Note: This item has a glue surface, peel off the clear peel off the paper and then stick, it is also important to clean the glass dirt, just leave the paper peeled off as in the comments, and do not stick.

[90cm*500cm]



[90cm*2000cm]



[90cm*200cm]



[90cm*3000cm]



[90cm*300cm]




Description

The glass cracked by strong impacts and strong winds caused by earthquakes and typhoons splashes around the surface as sharp debris and can be exposed to secondary damage not only by direct debris, but also by scattered glass during evacuation.
During a disaster, there are various dangers! Danger of sharp glass debris falling and direct hit. Danger of breaking cupboard glass doors and the tableware popping out falling, treating scattered glass debris, etc. As an earthquake countermeasure, please consider the [shatterproof film] on the window glass.
In the event of a disaster such as earthquake or typhoon, we recommend applying a shatterproof film to protect your family from broken glass.
By sticking the security film to the inner surface of the window for security measures, you can prolong the time to destroy the glass window and make it difficult to penetrate the glass break.
Transparent anti-crime film does not damage the luminance of the windowsill.
How to apply the window glass film: 1.Take the window glass stains and get plenty of water, cut the window glass film slightly larger than the actual window frame dimensions.
2. Once the window glass is ready, apply it firmly once again.
3. Slowly peel off the transparent film on the back of the window glass film, spray the glass film adhesive (back).
4. Hold the top of the glass film with both hands and stick vertically from the top to the vertical and carefully.
5. When everything is applied, use the skier to release air bubbles and moisture.
6. Bubbles and water that could not be removed by skiing, make an air hole on the seat with a needle and push out the air bubbles and water.
7. Cut the excess glass film that protrudes.
8. Finished
If there is a problem with the product, such as initial defect, damaged during transportation, please contact us by email after the item arrives.