Feature
●Aluminum Airtight Seat for Renovation
●For roofs and walls
●Supports renovation
●Thickness 0.2 inches (5 mm) x Width 39.4 inches (1,000 mm) x Length 92.8 ft (33 m)
[1set]
Description
Can be used for roof, ceiling, and wall renovation.
Aluminum Foil Infrared Reflector provides heat insulation and perfect barrier insulation and sound absorption.
Place the aluminum surface toward the heat source, and at least 0.6 inch (15 mm) air layer on the top.
Please fasten the tucker at a 3.9 inch (100 mm) pitch so that it wont flatten.
Infrared reflectivity 92% JISA1423 actual measurements
Thickness 0.2 inches (5 mm) x Width 39.4 inches (1,000 mm) x Length 92.8 ft (33 m)
From the Manufacturer
Heat shielding effect with infrared reflection of aluminum foil, suitable for summer heat prevention.
|
|
|
|
|---|---|---|
Installation on field plateMake sure to set a layer of air at least 0.6 inch (15 mm) on the top of the aluminum surface toward the heat source. If the sun reflects light on the aluminum and glare, please put on sunglasses.It is slippery, so please avoid installation in rainy weather, and take precautions such as lifelines. |
Easy to cut with a cutter.Highly reflective aluminum foil heat sealed to polyester insulationThe insulation is lightweight yet innovative insulation.Weather resistant for long term use.It has high sound absorbing performance that quietly sounds from rain without any harmful substances such as alternatives.Self-extinguishing, high fire retardant performance (Flash point 410 degrees Celsius). |
Constructed from atticMake sure to set a layer of air at least 0.6 inch (15 mm) on the top of the aluminum surface toward the heat source.To prevent flattening please clip it to the rafter at 3.9 inches (100 mm) pitch.It also has a thermal insulation effect when placed on top of the insulation with the aluminum side up. |
