"3M Process Tape" with high heat and chemical resistance In the process of plating painting, plating processing, printing circuit board soldering, semiconductor and electronic components, the product used has high heat resistance and less glue residue due to chemical impregnation, and chemical resistance that can be removed cleanly."3M Process Tape" has both adhesive tape.This product not only prevents masking where heat resistance is required, but also prevents resin leaks and burrs when sealing the resin.
|
Masking tape for 3M plating when plating on printed circuit boards The 3M Plating Masking Tape 851T is a tape that has a special blend of translucent green adhesive evenly applied to a polyester film.This tape was developed as masking tape for printed circuit boards, nickel-plated, chrome-plated, and more to withstand most plating fluids and keep your bath clean.Specifically, it is compatible with printed wiring boards with solder-resisted copper through hole boards (no solder-leveler), with less adhesive residue and glue residue. The special thick-coated adhesive combined with a polyester substrate prevents the gilded liquid from ghosting and protects the printed circuit from heat and steam during the process of gold-plated paint.The 3M 851T Masking Tape for Plating is also used for low surface energy difficult adhesion materials, and it can also be used for silicone coated paper splices.
|
Heat Resistant Adhesive Tape "3M Heat Resistant Polyimide Tape" Heat and chemical resistant tape on polyimide film substrates.Can be applied to high temperature and chemical processing applications in the production of semiconductors and electronic components.The 3M Heat Resistant Polyimide Tape 5412 uses acrylic adhesive that is heat resistant up to 180 degrees Celsius and the 3M Heat Resistant Polyimide Tape 5413/5419/5434 is heat resistant to 360 degrees Fahrenheit.5419 has been treated with an anti-static treatment to prevent static and static troubles.
|
Non-silicone for electronic components. 3M 7414 Non-Silicone Heat Resistant Polyimide Tape does not contain silicone ingredients, making it ideal for use with silocyric gas or silicone transfer concerns such as masking, temporary fixing, component protection, through hole seal, lens protection, etc.The adhesive is low polarity and heat resistant, so it can be removed smoothly after heating 260 degrees and 30 minutes without any sticky residue, as well as general copper plates.
|