Feature
●Maximum pipe diameter: 0.9 inch (24 mm) / 4 stage lightweight monopod
●The main body of the legs is approximately 9.8 oz (275 g).
●Comes with a custom free-head head head
●You can also use it as a tripod extension pole by removing the head and the pegs from it.
●Combine with a tabletop tripod to quickly transform it into a freestanding monopod.
●Equipped with a urethane grip that keeps you cool in the winter.
[GX]
Description
「SLIK ライティポッド GX」は、最大パイプ径24mm/4段の脚本体に、特別仕様の小型自由雲台をセットしたウレタングリップ付の超軽量一脚です。脚本体部分は約275gと超軽量設計(雲台含めて445g)。撮影スペースが限られていたり、少ない荷物で撮影に赴く場合などに重宝する一脚です。自由雲台と雲台取付ネジ、石突ゴムを外せば三脚用の延長ポールとしても使用可能。三脚にもう少し高さを足して、高い位置からの撮影を可能にします。また、「プロミニ 320」、「ミニプロ 7N」、「ミニ 3」などの卓上三脚と併用することで、自立式一脚としても使用可能。この1本で三脚の使い方が広がる多機能一脚です。
■軽量設計、自由雲台付きのカメラ用一脚
ワンタッチで伸縮ができるレバーロック式を採用した4段式軽量一脚です。脚本体部分は約275gと超軽量設計(雲台含めて445g)。苦にならない軽さで長時間の撮影でも疲れません。自由雲台はこの一脚のために用意された特別仕様の小型自由雲台を付属。レバーの固定位置を自在に変更できるので操作性は抜群です。
■これ1本で使い方広がる拡張性の高さ
「ライティポッド GX」の自由雲台と雲台取付ネジ、石突ゴムを外せば、三脚用の簡易延長ポールとしても使用可能。三脚にもう少し高さを足すことで、高い位置からの撮影を可能にします。
また、別売の「プロミニ 320」や「ミニプロ 7N」、「ミニ3」などの卓上三脚と組み合わせて使用することで、「スタンドポッド」などと同じような自立式一脚として使用することも可能です。これ一本でお持ちの機材の機能も拡張することができる「多機能一脚」となっています。
※様々な用途で活用できるよう、石突ゴムや雲台取付ネジなどの部品が取り外せるようになっております。部品の紛失には十分ご注意下さい。
From the Manufacturer
Easy to use, Slicks Write Pod GX Monopod
The monopod is more mobile than a tripod, allowing you to focus more precisely than your hand.In addition, it can significantly reduce shaking.
A multifunctional monopod that is both easy to use and affordable.
How to use the monopod
1. Stretch the monopod to reach the height of the eye.The shooting in the sitting position is adjusted to match the height.
2. Open both legs to the shoulder width.
3. Attach the monopod to the top of the triangle with the shoulder width on one side.
4. Hold the camera by pulling the camera forward.
5. Hold the camera without holding the monopod itself, and apply force down to prevent shaking.
6. The standard head head head is not fixed and can be used as a "joint" to make it more configured as desired.
Features
|
|
|
|
|---|---|---|
Comes standard with a custom free-head head headComes standard with a free-head head head that can be moved 360°. The head mount comes with a standard 1/4" screw, as well as an adapter that can be changed to 3/8" screw.Can also be mounted on 3/8" tripod |
Capable of shooting in portrait positionsStandard equipped free-head head allows for vertical shooting Not only does it take portrait, but it also allows you to enter the shooting position of the cityscape etc. |
Equipped with standard urethane gripThe urethane grip is standard equipped to prevent your hands from getting cold during the cold winter months or in cold climates. |
Easy to use Lighypod GX
|
|
|
|
|---|---|---|
Lever lock for easy operationThe joint part of the leg is lever-lock, so you can judge the lock state at a glance. In addition, the slicks unique structure allows it to be opened and closed without excessive force. |
4-tier construction maintains elasticity and durabilityUses a maximum pipe diameter of 0.9 inch (24 mm) / 4 steps, and the extension ratio is approximately 3 times.The 4 tiers were designed to provide a good balance of stretch ratio and durability, as the tip of the pipe becomes thinner after 5 tiers, and the durability will remain uncomfortable and durable. |
Can also be used as a monopod with freestanding legs when combined with a tabletop tripod (sold separately).Since it is specially designed to detach the head mount screws and the pores (rubber on the legs), it can be used as a tripod extension pole or combined with a tabletop tripod (sold separately). |
