Feature

●This soil temperature and humidity sensor has a digital output of up to 14-bit resolution.
●Internal self-calibration, no calibration required. High reliability and long-term stability
●The combination of temperature and humidity is convenient for dew point measurements.
●This product has a compact structure and I2C output, suitable for field applications and product integration.
●The brass construction can be used in high temperature and humid environments, so it is more heat resistant than plastic cases.


Description

Function: The sensor is dustproof, leak-proof and adopts aviation joints. Direct replacement for maintenance, no need to repeat wiring Suitable for computer room monitoring, HVAC, weather stations, warehouses, construction sites, concrete test block inspection, agricultural greenhouses, flower seedlings, etc.
Specifications:

Item Type: Soil Sensor

Operating current: <10mA

Temperature measurement range: -4 to 20 °F (-20 to 100 °C)
Humidity Measurement Range: 0-100% RH
Working conditions: -40°C - 125°C, 0-99%RH
Storage conditions: -4°F to 176°F (-20°C to 80°C), 0-95%RH
Line Length: 150cm/59.06in

Weight: 128g / 4.52oz (approx.)

FS200-SHT2X Series (Optional) Humidity Accuracy: %RHT Temperature Accuracy: °C Voltage VSHT20±3±0.33.3SHT21±2±0.33.3SHT25±1.8±0.23.3

Package List:
1 x Sensor

1 x Wire Marker

Note:
The relative humidity of air is a function of temperature. The temperature is greatly affected by relative humidity. Various compounds such as acidic and alkaline salts have significant impact on the physical properties of water vapor. When using, please pay attention to the following:
1. Temperature and humidity sensors should be placed in a place where the temperature is relatively stable and the temperature and humidity is measured best described.
2. Avoid installing in places where temperature changes suddenly.
3.Avoid installation in areas where air is intensively flowing.
4.Avoid the installation of dead corners where air will not flow through.
5.Avoid using in salt spray environment.
6.Avoid using in corrosive gas environments.