Feature

●★ Individually Addressable: You can control each LED individually! This is a digital addressable type of LED strip. 8-bit PWM accuracy (24-bit color per pixel) allows you to set the color of each LED components in red, green and blue The combination of WS2812B LED strip and FastLED library is very good
●★Full Color: 256 brightness and 24 bit color in all. Each 5050 SMD w/WS2811 has your own color and brightness. You can control each LED pixel independently to set the color or animation you need
●★CUT AND CONNECTABLE: WS2812B LED string light is flexible PCB material, can be easily cut by wire cutting machine. Of course, each WS2812B LED strip is easy to connect from end to end with a 3-pin JST connector, and the maximum quantity is based on the controller used
●★Easy to connect: First, you need 5V output power. Next, connect the power supply and the ground. Third, connect the ground and control (data) line to the ESP8266 or serial driven by any controller
●★Safe and easy to install. Working Voltage DC6V, Low Voltage, Low Voltage, Low Energy Consumption, Low Energy Consumption With 3M adhesive tape on the back, no screws or clips needed, it can be fixed on dry flat surfaces


Description

★ WIDE APPLICATION: You can make logo screen, advertising board. Suitable for hotels, karaoke, bars, shopping street atmosphere lighting and wedding, party lighting and mothers day, Halloween, Christmas holiday lighting, indirect lighting, illumination lights. Really good to replace traditional neon signs.
★Easy to connect: First, you need 5V output power supply. Next, connect the power supply and the ground. Third, connect the ground and control (data) line to the ESP8266 or serial driven by any controller.
★ COLOR VARIETY - Each LED bulb has its own color and brightness. Each LED can be controlled independently. It can be set different colors for each LED light bulb,also can be set to the same color and can be converted in different colors.

Note:
1) No power or controller. 5V power supply and controller are required.
2) The working voltage of the LED strip must be less than 6V. Otherwise, the whole thing will be broken.
3) If you want to hook multiple LED strips, external power supply is very necessary.