Description: Home All screws, bolts, nuts Suitable for long term use, prevents vibration loosening and screws from rusting Item is important for life and use Specifications: Name: High strength thread locker Product Size: Approx. 10 x 2.5cm/3.93 x 0.98" Product Material: Adhesive + pp Content Volume: 10ml Before Drying Features: Viscosity: 500mPa Density: 1g Fill Gap : 0.13 Fixing time: 10 minutes Rear fixing function: Fixing time: 24 hours Average break torque: 30 N·m Average break torque: 28 N.m Red Working temperature: -50 degrees C to 150 degrees C Prevention: 1. Shake well before use to ensure the components are clean and dry and no oil 3. This product must be in contact with air to prevent solidification Therefore, the bottle can be This product is suitable for M6 to M20 screws Bolt size is too large, the thread clearance may affect drying speed and strength 5. This product is not suitable for use in pure oxygen and oxygen enriched environments and can not be used as a hydrooxide seal material 6. This product is not suitable for pp adhesive fixing. Active ingredients: To prevent volatility. Avoid direct sunlight and high temperature environment 10. Can improve tightening rate if the torque to tensile ratio is out of the range when the user experience Note: 1. To avoid accidental ingestion, please keep it out of reach of reach of the range 2. Contact may cause stimulation directly. 3.Accidentally getting into your eyes. If you happen immediately rinse with water for 10 minutes