This product uses a piezoelectric acceleration sensor, suitable for measuring vibration in conventional mechanical equipment. It can measure vibration speed acceleration displacement, and is widely used in mechanical manufacturing.
Features
Wide measurement range of acceleration: 2 peak piezoelectric acceleration transducer converts vibration signal to electrical signals and analyzes the input signal and displays vibration speed acceleration displacement. Environment temperature can be measured by 2 temperature units; LCD displays measurement results and conditions directly; Widely used in mechanical manufacturing, electrical, engineering, spaceflight and aviation.
Specifications
Model HT-1201
Color: Gray
Vibration acquisition piezo ceramic accelerometer shear type
LCD Display: 3 digit half display
Measurement Range:
Acceleration 0.1199.9 m / s 2 peak value speed 0.1199.9 mm / s effective value displacement 0.00011.99 mm (0.1199.9 mm) effective value measurement accuracy ± 5 2 digit frequency range
Acceleration 15Hz - 1KHz LO1KHz - 10KHz - Speed 15Hz - 1KHz LO Displacement 15Hz - 1KHz LO Temperature Measurement 0 - 60
Temperature Accuracy: ±2
Auto power off time: 4 minutes
Power supply: 3 x AA batteries not included.
Operating Temperature: 045
Operating Humidity: 20 RH - 90 RH without condensation.
Storage Temperature: -2060
Size: Approx. 5.9 x 2.8 x 1.3 inches (150 x 70 x 32 mm).
Weight: Approx. 26 oz (737 g).
Package List
1 x Vibration Meter
1 x Probe
1 x Handle
1 x Plastic box
1 x User Manual
Note
Do not disassemble the device casing. Do not use in explosive gas vapor and humid environments. When measuring near the rotary part of this unit. Clean with a dry cloth. Do not use a corrosive detergent. Please take out the batteries when the device is not in use for a long time or store temperature is over 50. Please allow small size errors due to manual measurement. Thank you for your understanding.