Total luminous flux: 400 lumens
T20S LED TURN SIGNAL BULB NEO15 Wedge Single Bulb
LED Color: Amber
This is an evolving NEO valve series.
Overwhelming brightness and optimal diffusion.
T20 single bulb dedicated to high spec LED turn signal lamp (turn signal lamp) with a total luminous flux of 400 lumens.
High diffusion irradiation for omni-directional
3 on the top of the valve and 2 on the side on each 6 sides for efficient and intense light in all directions.
Projector lens on top
It provides a much more clearly recognizable light even in bright daytime environments.
Enjoy the blinking of the blinking of the blink that is unique to LED.
Product Features = Pika-Q Attention
■ Total Luminous Flux 400lm Brightness ■
Brightness achieves 400 lumens of total luminous flux.
Brightness and diffusive enough to be recognized in daytime environments.
■ High diffusion irradiation to omni-directional ■
Equipped with 15 high brightness LEDs. 3 on the top of the valve and 2 on the side on each 6 sides for efficient and intense light in all directions.
Effectively reflects turn signal lamp reflector.
Projector lens on top
Allows for greater distance, amber light illumination and increases visibility and provides safety
■Constant current circuit ■
It is equipped with constant current circuit, so it will stay steady on without being affected by the above and below the vehicle voltage.
It reduces the load on the LED and provides a longer life.
Can be worn with a variety of domestic 12V vehicles, including hybrid cars, EVs, PHV vehicles, etc.
■ Thoroughly countermeasure heat dissipation ■
Among the various lamps in your vehicle, turn signal lamps are very important.
This product is a machined aluminum heatsink that effectively treats the heat generated by the LED, minimizing the loss of heat caused by the light.
It will stay steady even when flashing for long periods of time.
■ Equivalent size of T20 genuine bulb ■
The same size as the original T20 bulb, so you can use it with confidence if you have the valve type [W21W/WY21W].
■ Non-polarity ■
Easy to install without worrying about polarity.
[Always Read]
◆This is an LED bulb that replaces the original incandescent bulb. Will not work with factory LED lamps.
When you install this product only on the turn signal lamp and turn it on, it will enter a high flashing state (fast flashing). Please purchase the LED high flasher prevention resistance unit (8Ω) separately. Use 1 resistor unit per turn signal LED bulb
◆Depending on the car model, even if the vehicle model matches the specifications of the vehicle may differ from the information listed on the product page depending on the conditions of the vehicle and optional items. Please make sure to check the shape of the valve (bulb standard) in your vehicle before purchasing.
Pikaku continues to focus on high quality.
In Pikakucu, every LED bulb we sell is thoroughly inspected in Japan.
In addition to initial lighting confirmation, it also includes continuous lighting inspection, voltage fluctuation lighting inspection, and visual inspection of scratches, color temperatures, and dents.
The inspection method and inspection time vary by product, but it takes about 5 to 15 hours to confirm the product passes or not.
Disclaimer: For any type of legal claim the company shall not be held responsible for any loss of product directly or indirectly arising from the use of our product or product, rent, business interruption, loss of business information or any other financial damages other than product directly or indirectly arising from the use of our product or product