Feature

●✔ High Precision: Digital and resolution up to 14 bit can be applied to computer room monitoring, warehouses, construction sites, concrete test block inspection, agricultural greenhouses, flower seedlings, etc
●✔COMPACT: Internal self-calibration, no calibration required, compact product structure work condition for field application and product integration: sensors ensure normal performance within the recommended range of motion. Especially at humidity > 80%, if exposed to long term conditions outside of normal range may cause temporary signal drift (drift after 60 hours + 3% RH)
●✔Temperature and Humidity Sensor: Close combination of temperature and humidity for convenient measuring. Storage conditions and operation instruction: Humidity sensor is not a normal electronic component, so it should be carefully protected. This must be taken seriously. Sensor readings will drift when exposed to high concentration chemical odor for a long time
●✔ Stability: Anti-leaching, dustproof, anti-rust, high reliability, long-term stability. The relative humidity of air is a function of temperature. The temperature is greatly affected by relative humidity. Various compounds such as acids and alkaline salts have a significant impact on the physical properties of water
●✔I2C Interface: I2C serial interface can be easily integrated


Description

Specifications:

Item Type: Temperature and Humidity Sensor

Model: FS400-SHT30 / 31/35

Working current: 10mA

Temperature measurement range: -4°F to 212°F (-20°C to 100°C).

Humidity Measurement Range: 0-100% RH

Working conditions: -40℃~120℃, 0~99%RH

Storage conditions: -4°F to 176°F (-20°C to 80°C), 0-95%RH

Housing Material: Stainless Steel, Plastic

Line Length: Approx. 59.1 inches (150 cm).

Weight: Approx. 4.1 oz (115.8 g).

Package size: about 20 x 14 x 3.7cm

Optional styles: SHT30, SHT31, SHT35

FS400-SHT3X Series

Humidity Accuracy: %RH

Temperature Accuracy:

Voltage V

SHT30

±2

±0.2

3.3-5

SHT31

±2

±0.2

3.3-5

SHT35

±1.5

±0.1

3.3-5

Package List:

1 x Temperature and Humidity Sensor

1 x Cable

Note:
When using, please pay attention to the following items:

1. The temperature and humidity sensor is relatively stable and should be installed in a location that best represents the temperature and humidity of the surrounding temperature and humidity.

2. Avoid installation in places where temperature changes dramatically.

3.Do not install in air flow.

4. Do not install blind spots that do not allow air flow.

5.Avoid using in salt spray environment.

6.Avoid using in corrosive gas environments.

7. Do not install blind spots that do not allow air flow.