Feature(may vary by option.)

●Small and portable, powerful, precision, lightweight and reliable mini lathe
●Caution: If the user does not have the basic experience of lathe, please follow slow, caution, and other safety operations
●The chuck shaft, wood shaft, and center axle of the center of the center of the chuck must be straight, otherwise the nut must be adjusted
●If it is not a cylinder, you need to lower the speed
●When using a milling cutter, tighten the bottom of the screw and place it away from the material

[220V EU]

Description

Parameter:
Input Voltage: AC100V-240V 50/60Hz
Output Voltage: DC 12V 2A
Motor Rated Power: 24W
Motor Speed: High speed motor 20000r/min ± 15%
Low speed motor: 10000r/min ± 15%
Spindle Speed: High speed motor 3000r/min±15%
Low speed motor: 1600r/min ± 15%
<;0.1mm
Large Slider Stroke: 1.8 inches (45 mm)
Slider Stroke: 1.4 inches (35 mm)
Center Height: 1.0 inches (25 mm)
Center Distance: 4.3 inches (110 mm)
Maximum processing diameter: 0.5 inches (13 mm), reverse nail, 1.8 inches (45 mm)
Three Jaw Chuck Clamp Diameter: 0.5 inch (13 mm), 1.8 inch (45 mm) Inverted Jaw
Handle scale: 0.004 inch (0.1 mm) / scale.
Connection method: M12 x 1 screw hole
Minimum Clamp Size: 1.5mm * 1.5mm
Maximum Clamp Size: 0.7 x 0.7 inches (18 x 18 mm)