Feature

●1. Compliant with IEEE 802.3af Power over Eernet (support 10/100Mbps) Extends the P range more 100 meters
●3.2-Port P Extender can transfer both Ethernet and P power of a single device via 5, 5e, 6, 6e and UTP cable
●2. Automatically detect the P device and protect it from damage caused by wrong installation. No plug and play settings required
●The 4.2-port P extender has three 10/100MLAN ports, one for power input, and the other two for power output. 10/100BASE-TX, IEEE802.3af-P compliant
●5.Use for AP, IP camera, IP phone and other network devices without power wire or far away from power outlet. It is installed in hotels, schools, buildings, villages and more


Description

Hapignly POE Input: 1 RJ45 port
POE output: 2 RJ45 ports
POE pin output: 1/2(+), 3/6(-); MAX power 15W
Network medium: 5 or more UTP cables (less than 120m)
Repeater Mode: Store and forward
Address table: 2K
Packet Buffer Memory: 48 bytes
Switching Capacity: 0.04 oz (1.0 g).
PoE Standard: IEEE 802.3af
Input Power: 13W
Output Power: 12.2W
Input Voltage: 44-55V 0.5A
Output Voltage: 44-55V 0.525A
Power Type: 1/2+, 3/6, Mode A, End Span
Network protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE802.3af-Power over Ethernet;
Regulatory Compliant: C Part 15B, RO Directive 2011/65 / EU, Low Voltage Directive 2014/35 / EU, EMC Directive 2004/108 / EC;
Operating Temperature: -10°C to 45°C
Working Humidity: 5% to 90%, no condensation
Color: Black.
Material: Plastic + Metal
Size: 88 x 43 x 22mm

Package Include:
5 x 2 Port POE Extender

Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is 0.4 - 1.2 inches (1