[Single Item]

Product Description

Uni-Track standard size of 9.7 inches (248 mm) in length and compact size for ease of use. Save space and enjoy driving.
Based on the left side of the passage, the two types are released at the same time as the "right" which is brought to the right, and the "left" that merges together. Of course, the double wire spacing is 1.3 inches (33 mm).
The 2 sets of 4 points are combined with a single strand, making it a focal point. Affordable and easy to install.
The PC concrete sleeper, which is the basic of a multi-track track, and the point part is reproduced to the latest specifications of synthetic bedwood that is commonly seen in recent years.
An electric point that can be switched between direct to song (long) by using a lever or point switch. The point machine is fully interior of the road.
Like the traditional number 4 point, you can switch between track passages and non-selectable types. Double wire interval permanently insulated, prevents short circuit during switching.
Non-selectable setting allows for use as a spring point Suitable for various driving situations, such as folding up at intermediate stations.
Point switch sold separately.

(From Amazon.co.jp)

Safety Warning

Not Specific

From the Manufacturer

If you are starting to model railways, we recommend the Uni-Track Katos train system that is easy and reliable.

The "Uni-Track with Katos roadbed" is a train system that can be enjoyed by beginners, such as connecting parts (unijoiners) that do not have to worry about power loss or plastic roadbeds that boast outstanding stability.

In addition to a rich lineup of electric points, elevated tracks, and double track tracks that can be operated with a switch at hand, the high system allows you to easily develop track plans.

How to connect "Uni-Track" track

When connecting the rail, please bite the unijoiner together on a flat surface such as a desk and press it parallelly. When connected securely, it will make a "snap" sound.	When removing the track, gently fold it in the side and remove it. Do not apply force vertically to avoid damage.

If the unijoiner (rail connecting part) is broken, you can only replace the unijoiner.	The UniJoiner can be removed by pulling the "UniJoiner Remover" that comes with a starter set, etc.	The railroad model is powered from the rails through the wheels, so please keep track and wheels frequently.We recommend the special maintenance solution "Uni Cleaner".