Digital Clamp On Ground Resistance Meter
Features:
Clamp Grounding Resistor Meter is widely applied to ground resistance measurement and loop resistance measurement in fields such as electrical, communication, weather, oil field, architecture, industrial electrical equipment and so on. If you use a loop to measure the grounding system, you do not need to cut it. Ground wire without auxiliary electrodes, more safe and faster.
The clamp ground resistor meter can measure ground circuits that cannot be measured by conventional methods, and can be applied if conventional methods cannot be measured.
Clamp Grounding Resistor Meter measures the integration value of ground resistance and resistance leads.
Specifications:
Functions
Ground resistance test, loop resistance test
Power Supply
6VDC 4 LR6 alkaline batteries
Resistance Range
0.01-200
Resistance Resolution
0.001
Highest Resistance Accuracy
±1%±0.01
Data Memory
99 Sets
Alarm threshold setting range
Resistance: 1-199
Alarm sound and light
"Beep Beep" alarm sound, flashing alarm symbol, press AL key to turn on and off, set alarm threshold
Interference Signal Recognition
"Pippippi" sound, NOISE symbol flashing
Temperature and Humidity
-20℃~55℃;20%RH-90%RH
LCD Screen
4-digit LCD display, Screen L x W: 1.9 x 1.1 inches (47 x 28.5 mm).
Clamp Size
32mm
Clamp opening range
32mm
Tester Weight
45.6 oz (1,160 g) (including batteries)
Clamp Dimensions
Length x Width x Thickness: 11.2 x 3.3 x 2.2 inches (285 x 85 x 5
Level of Protection
Dual Insulation
Structural Features
Clamp CT
Shift
Automatic Shift
External magnetic field
<;40A/min
External electric field
<;1V/min
Single measuring time
0.5 seconds
Resistance measurement frequency
>1KHz
Measuring current frequency:
50/60 Hz automatic measurement
Low battery indicator.
When the battery level is less than 5.3V, it will display the symbol of low battery power.
Full Memory Display
MEM symbols link when all 99 sets are full of memory
Over Range Indicator
Out of range display "OL", "L0.01" or "OLA"
Auto Power Off
After 5 minutes of startup.
Power Consumption
Up to 164.0 ft (50 m) at startup, normal operation, 30 hours of continuous operation
Accessories
Meter: 1 pcs, Test Ring: 1 pcs, Meter Suitcase: 1 pcs, Batteries: 4 pcs (LR6) (Package not included)