Feature
●3D heat dissipation hole design: Multi-angle heat dissipation design allows for rapid heat dissipation. The heat dissipation effect is better and practical
●(Excellent Aluminum Plate as a Heater) Efficient heating tube with multi-tube technology ensures good heat transfer effect; Temperature range: 0-400°C
●CPU Temperature Control: The constant heating platform has a built-in high performance CPU to control temperature, which is accurate and practical. It has an auto-detecting sensor function that automatically detects the failure of the heating part of the machine. Intuitive and clear high definition LED digital temperature display
●Efficient Heating: The electric heating plate uses high-quality aluminum alloy plate with the advantage of fast heating speed, high efficiency, even temperature, and convenient temperature control. Multi-tube technology heats the tube with effectively even heat transfer and high heat transfer efficiency
●Uses: Component heating operation, SMD remanufacturing operation, PCB board solder removal operation, etc. Aluminum substrate welding and maintenance in the LED industry Preheat the core in the polishing factory. Constant temperature heating for sealing and distribution in the electronics industry. Baking, drying and other temperature testing in a variety of industries of constant temperature heating samples. Basic tool for laboratories, analysis, educational research
Description
Hatami Figure - Katanoku 4 Great Functionality
Features
This heating station has a built-in CPU for temperature control
The aluminum alloy plate on the top is heat conductive, ensuring temperature uniformity.
This product is suitable for element heating, SMD replacement, PCB breakdown and welding
LED digital temperature display, intuitive operation clarity
Specifications
- Voltage: AC 110±10%
- Power: 850 W
- Temperature range: 88 - 802°F (30 - 400°C).
- Temperature Display: 3-bit (Display Resolution: 0.4°F (1°C)
- Constant Temperature Stability: ±1.5-0°C
- Hot Plate Size: 7.9 x 7.9 inches (200 x 200 mm).
- Size:21.5*21.5*14 cm/8.46*8.46*5.51"
- Package weight: 3,300 g
|
|
|
|
|
|---|---|---|---|
High quality aluminum alloy heating plateAluminum alloy heating plate adopts integrated molding technology using advanced processing technology.Features include high thermal conductivity, rapid heating, even heating, no deformation at high temperatures. |
Power Jack and Extra FuseThe power jack uses insulation material.Extra fuses under the socket for convenient replacement. |
Non-slip rubber feetFour corner non-slip foot pads, thick rubber material, strong and durable.Anti-slip design, suitable for various environments, effectively prevents the machine from slipping. |
Heat dissipation hole design, fast heat dissipation3 side ventsMulti-angle heat dissipation hole design.Three-dimensional heat dissipation holes allow for fast heat dissipation. |
KLD Constant Hot Plate, Electric Heating Plate, Welder Kit, PCB Preheating Station, 7.9 x 7.9 inches (200 x 200 mm)
Applications: Component heating operation, SMD remanufacturing operation, PCB board solder removal operation, etc.
SECURITY DESCRIPTION:
* Make sure the ground line of the machine is good!
*Please do not direct air flow to the plate. Otherwise, the heater will be affected by heating!
* Desktop with constant temperature platforms must be flat to maintain the level of aluminum platform, and desktop materials need heat resistance!
* During work, the surface of the board and the surrounding area are very hot. Be careful of burns!
*Do not use hot plates near flammable objects!
* Turn off the power and wait for the hot plate to cool to room temperature!
*This machine is a high temperature electric heating product. If you do not use the machine, please turn off the power to avoid danger and accidents.
*To extend the life of the heating element and equipment, prohibit the use of devices at high temperatures (above 300°C)). In general, the machine should not exceed 8 hours of continuous operation time.
* Ventilation windows on the constant-temperature platform chassis must be shielded by foreign objects to prevent heat dissipation effects. Metal objects cannot be inserted into the chassis and may cause electric shock!
*Do not place in damp or corrosive places!