Temperature range: 50 ~ 350 degrees, positive or negative 1 degree temperature display: 3 (display resolution: 1 degree) Heating panel: Dimensions mm: 200 * 200 * 20 Constant slow stability: 1.5 degrees Traditional temperature setting: * Press the key to enter temperature setting mode * Press the key to set temperature central value and key heat setting temperature setting temperature setting temperature setting Or switch to cooling. Instant Temperature Setting: Constant temperature heating unit can be adjusted directly heating or cooling key to current operating temperature ±50°c
Note 1. The workbench where heating unit is installed must be smooth, and the material must be heat-resistant. 2. During work, the board and its surroundings become very hot, so be careful of burns and burns. 3. Heated objects are safe and may damage the heating element due to high temperatures. 4. Do not use heating plate near flammable and flammable substances. 5. When moving or touching the machine, please make sure to turn off the heating plate. 6. This machine is an electrical product with high temperature. In order to avoid danger or accident, please remember to turn off the power if you do not use this device. 7. In order to extend the life of the heating element, this unit is prohibited to be used for a long time at high temperatures (above 300 °C). Under normal circumstances, this unit should not exceed 8 hours of continuous operation.
Note 1, Make sure the machine is ground up. Do not expose the air directly to the plate to affect the heating of the heater.