If you have any questions, please feel free to email us at any time. Thank you!
Features:
- Suitable for industrial automation equipment, stepper motor rails.
- Fits 3D Printers Engraving Machine; XYZ Module Slider; Lift Electric Shock Therapy
Specifications:
Lead screw:
Material: Stainless Steel
Diameter: 0.3 inches (8 mm)
Pitch: 0.08 in (2 mm)
Lead: 4
Total length: 0.08 inches (100
Screw Nut:
Material: Brass
Diameter: 0.3 inches (8 mm)
Pitch: 0.08 in (2 mm)
Lead: 4
Mounted Ball Bearings:
Material: Zinc Alloy
Hole Diameter: 0.3 inches (8 mm)
Total Length: 2.2 inches (55 mm)
Height: 1.1 inches (29 mm)
Shaft coupling:
Material: Aluminum
Shaft: 6.35 x 8 mm
Length: 1.0 in (25 mm)
Diameter: 0.8 inches (20 mm)
Motor Parameter:
Step angle: 1.8°
Step angle accuracy: ± 5%
Resistance Accuracy: ±10%
Inductance accuracy: ±20%
Temperature rise: 176°F (80°C) maximum (rated current 2 phase)
Ambient Usage Temperature: -4 to 122°F (-20 to 50°C).
Insulation Resistance: 500 VDC for 100 Mohm
Electrical strength: 500 VAV per minute
Radial Draft: 0.02 Max (450 g load)
Axial Gap : 0.08 Max (450 g load)
Maximum radial tolerance: 28N
Axial Maximum Tolerance: 10 N
How to install:
1. Put the screw nut into the lead screw.
2. Install the mounted ball bearings separately on both ends of the lead screw 2. Then
3. Depending on your size, you need to adjust the distance between the nut and the mounted ball bearing.
4. Put shaft bonded to horizontal lead screw of mounted ball bearings
Package includes:
1 x 000 mm lead screw.
1 x Screw Nut
2 x Mounting Ball Bearings
1 x Shaft coupling
1 x Motor