Feature(may vary by option.)

●Illuminated meter display for night use
●Audio Tone Plus Analog Signal Strength Meter Display
●You can set up or maximize your satellite signal reception by yourself without the need for your friends to assist or do multiple trips. Easy to use roof Convenient tool for arranging satellite meals in minutes
●No external power or batteries required. Powered by satellite receiver
●Very sensitive meter showing very small changes in signal strength

[9505E]

Description

Wiring and Operation: Connect the jumper cable from lnb / lnbf. "to LNB" connection satellite search 2. Connect the cable from satellite receiver 3. Turn on the satellite receiver. Adjust the knob to the signal strength display: About 0% (in critical point) 4. Set the cooking to the appropriate azimuth setting and elevation settings (this information: your satellite satellite Need to be attached to the pan If satellite search readings adjust level control to full scale incoming signal to lower level knob to keep moving best meter reading and minimal sound interval 6. Remove jumper cable and satellite finder to avoid continuous full-scale reading. Do not use satellite search. Please use A directly in front of the plate to insert a 5DB attenuator while lnb / lnbf. and satellite search options are 40 on the front panel: a) LED. 22kHz mark: receiver transmits a signal of 22kHz used to switch some switches to LNB. High bandwidth frequency. 0Hz Marking: The receiver will not transmit a signal of 22 kHz. c) LED. Marked at 13 V. Satellite receiver switches between switching 13 V. Vertical polarized. LED.