Features:
1 This module is used when actual operation requires insulation control and voltage conversion
2. Can realize 3.3V or 5V to control the interface of the voltage level of 3.6 to 24V. When the control terminal is turned on, the control terminal is turned on.
3 Photoelectric insulation has strong anti-interference ability. It can drive large behindPower triodes, MOS tubes, etc. that require high voltage drive, and can also drive low power 24V relays directly.
4 Please note that the 817 limit is less than 4KHZ. Do not use this module if the control signal exceeds 4KHZ. Does not work properly.
5 Through the jumper, you can achieve whether the output is high potential or low production.
6 The 4th and 817 on the board are independent, allowing simultaneous control of different voltages, etc.
Specifications:
Condition: 100% Brand New
Item Type: 4-Way Voltage Insulation Board
Material: ABS.
Guide gate signal voltage: 3.6-24V
Output port voltage port: 3.6-30V
Jumper can take out the gate: pull high potential or exit pad
Package List:
1 x 4-way voltage insulation board
Note:
1 The color of the actual item may vary from the picture due to the light.
2. There may be a slight deviation in the measurement of the product.