Function:
1 Wide frequency range, stable gain, small noise index, large dynamic range
2. The clock signal generator has a large heat dissipation area so you can drive for a long time.
3 The PCB uses 1.6mm thick double-sided board. This is the whole process of spraying the tin to ensure good passage performance of high and low current.
4 The SI5351 clock signal generator is made of high quality PCB, durable and longer service time.
5 The output frequency is F0 = F1 = 2.5K ~ 200MHz (F2 and F1 share the phase lock loop and set the perimeter ratio)
Specifications:
Item Type: Signal Generator
Material: PCB
Model: SI5351 Clock Signal Generator
Supply Voltage: + 5V
Output frequency: F0 = F1 = 2.5K ~ 200MHz (F2 and F1 share the phase lock loop and configure the frequency split ratio)
Output Interface: Sma Female
Configurable minimum step: 1 Hz (equipped with STM32 + 1.3 inch TFT).
Technical Support: Provides PDF schematic and STM32
Package List:
1 x Signal Generator
Note:
1. Do not use overload.
2. Do not use over pressure.
3. Do not use over current.