Feature(may vary by option.)
●For the same number of turns and volume, the "inductor" value of the hollow inductor is much lower than the solid inductor
●Hollow inductors are suitable for high-frequency applications, but solid inductance has a serious frequency tendency
●This means that the hollow induction reactance allows the majority of audio or audio to pass through, and the solid induction reactance is selective and the portion of the passing
●The reason to use these two inductive reactances is because audio and/or audio is required
●In a divider, hollow induction reactance is commonly used in the front level, and theoretically it can pass through 20-20 kHz voice
[1.2mH]
[0.8 mH]
[0.4 mH]
[0.2 mH]
Description
Tips:You can customize a variety of sizes such as 1.4MH,1.6MH,2.0MH,2.3MH,2.6MH,3.0MH,3.3MH,3.8MH,4.2MH,4.5MH,5.0MH,etc. What other inductance specs?
Item size:
0.2 mH: 1.3 x 0.5 inches (32 x 12 mm), 0.4 mH: 1.4 x 0.5 inches (35 x 12 mm).
0.8 mH: 1.5 x 0.5 inches (39 x 12 mm), 1.2 mH: 1.8 x 0.6 inches (45 x 15 mm).
Tips: If you need other inductive type, please contact me. Customization is available.
99.9% Oxygen Free Copper
Oxygen Free Copper Price = Regular Copper * 1.5 Times = Copper Filled Aluminum Price * 2-3 Times
Why oxygen-free copper is so good? Pure copper that contains no oxygen and does not contain deacidant residue. The appearance of copper oxide in an interactive form in the grain boundary affects the toughness of the materials. The oxygen in the oxygen-free copper is very low, but the uniformity of the copper structure is beneficial for toughness of the single-phase structure.
Polyester Enamel Wire:
PEVA enameled wire has a thermal rating of 130 and a denatured enamel wire has a heat rating of 155. The product has high mechanical strength, good elasticity, scratch resistance, adhesion, electrical properties and solvent resistance. It is the largest production in China, and it takes about 2/2: widely used in various motors. Appliances, meters, telecommunications and appliances
For the same number of turns and volume, the "inductor" value of the hollow inductor is much lower than the solid inductor.
Hollow inductors are suitable for high-frequency applications, but solid inductance has a serious frequency tendency.
This means that the hollow induction reactance allows the majority of audio or audio to pass through, and the solid induction reactance is selective and the portion of the passing.
The reason to use these two inductive reactances is because audio and/or audio is required.
In a divider, hollow induction reactance is commonly used in the front level, and theoretically it can pass through 20-20 kHz voice.
After the frequency split, it only passes audio signals after "split" such as 20 - 1 kHz, 1 - 10 kHz, and 10 - 20 Hz.
Package
1pcs