The swing magnet hook is movable and easy to use.
Can be used on top and sides.
The maximum load capacity is about 4.4 lbs (2 kg), and the side use is about 2.2 lbs (1 kg).
Load capacity is only a guide, and it will vary depending on the material and environment of the installation location (thickness and surface coating).
Depending on the material of the mounting surface, there may be some scratches.
If you are concerned about using the product, please stick the commercially available cellophane tape to the magnetic surface before using it to reduce scratches.
(But the load capacity will be reduced. )
Please do not apply it in a way that may cause an impact.
When removing this product, hold the base of the hook firmly and remove it in a horizontal direction.
(If you remove it in a manner it may damage the mounting surface.
If you hold the hook part and remove it, it may cause damage. )
For use with maximum load-bearing weight, steel wall surface is 0.08 inch (2 mm) thick.
Do not apply loads in diagonal or horizontal directions, such as tightening ropes. This may cause them to fall down.