Conventional wow pedals use one inductor circuit, boosts one specific frequency band (peak point).
By moving the pedal, it changes the frequency band of boosting from bass to treble to produce a distinctive sound of the waupedal.
Twin Peaks Wow Pedal "TWP10" uses two inductor circuits to boost two peak points and move the pedals to change the frequency range.
In addition, you can adjust the balance between the two frequency bands, and choose the variable range for bass or treble modes. This unique design allows you to utilize a simple wow sound to a modulation effect.
You can create versatile wow sound even with a wow sound.

Specs
- Controls : Master level, Balance
- Switches : Effect on/off, Tone mode (High/Low)
- I/Os : Input, Output
- Other : True Bypass
- Size : 96 (W) x 202 (D) x 60-84 (H) (mm)
- Weight : 815g (incl.battery)
- Required current : 15mA @9V

From the Manufacturer

New Wow sound created by 2 peak points, "TWP10"

Conventional wow pedals use one inductor circuit, boosts one specific frequency band (peak point).

By moving the pedal, it changes the frequency band of boosting from bass to treble to produce a distinctive sound of the waupedal.

Twin Peaks Wow Pedal "TWP10" uses two inductor circuits to boost two peak points and move the pedals to change the frequency range.

Furthermore, you can adjust the balance between the two frequency bands, and choose the variable range for bass or treble mode, and you can create versatile wow sound from simple wow sound to unique wow sound that emits a modulation effector.

Balance Control Knob

Adjust the mix level balance of each of the two peak point frequency bands.

The treble side is close to the variable range of traditional wow pedals, and the bass side is close to the variable range used in custom wow pedals and signature wow pedals.

Balance control adjusts the mix level balance of these two frequency bands.

In the position of the knob in 0 (turns counterclockwise), only the treble side is boosted, and the bass side will gradually boost as you turn clockwise.

At 12 oclock, the treble and bass sides are at the same level, and at full position (clockwise off), only the bass side is boosted.

Tone Mode Switch: You can choose between two frequency bands that are boosted from high and low mode.

High mode:

Variable range of frequencies boosted on the treble side is from 670Hz to 3kHz

This is a frequency band higher than the typical wow pedal, so the tone may be too bright.In that case, it is recommended to adjust the balance control, master level, or to control the treble with the guitar tone control.

Variable range from 300Hz to 1kHz on the bass side.This is a slightly lower frequency band than traditional wow pedals.

Tone Mode Switch: You can choose between two frequency bands that are boosted from high and low mode.

Low mode:

Variable range of frequencies boosted on the treble side is from 450Hz to 2kHz

This is almost the same frequency band as traditional wow pedals.

Variable range from 220Hz to 750Hz.

HIGH MODE

Low Mode

Master Level Knob Adjusts the overall output level. At the 12 oclock position, it is equivalent to a traditional wow pedal, and a +6dB boost level when turned right	LED Indicator LED lights up when effect is on.When using batteries, Replace the battery if the LED becomes dark or no light up.	Aluminum alloy die-cast body Rugged and durable aluminum alloy die-cast housing