Specifications:
Size: Approx. 65*24*22mm/2.6*0.9*0.9inch
Input Voltage: 6V-12V
Input Current: 0.5A-2A (depending on input voltage)
Input line length: about 10cm/3.94"
High Voltage Type: DC Type
Output voltage: about 80KV (Please be careful when using)
Output Current: 0.5A
Output line length: about 10cm/3.94"
High voltage pole ignition distance: ≤1.5cm (1.5cm is the maximum distance, 1cm better)
Module Usage Notes:
1. Do not turn on when no load. Before turning on the power, you need to adjust the suitable distance of the high voltage terminal. The arc distance of the high voltage line is proportional to the voltage and capacity of the battery.
2. Test for short or long experiments Arc distance is prohibited to exceed the maximum arc distance (<1.5cm, 1cm is OK). Otherwise, the module is prone to damage at high voltage and will not emit energy.
4. Determine if the battery capacity can drive maximum output power is a method of measuring battery voltage in arc state.
5. The small capacity series lithium battery is 7.2V, the voltage will drop to about 4V when arcing, the smaller the capacity the voltage will be lower It is recommended to use 2000MA or higher lithium We suggest you choose batteries above 4000MA
6. The power time should not exceed 20 seconds each time. The output power is strong, and needs to be powered by secondary batteries or storage batteries. Improper voltage and long time work can easily damage the high voltage module. Please be careful when testing and use! Ignition distance should be within 0.4 inches (1 cm).
Package Includes:
1 x High Voltage Pulse Generator