KIKAIYA Large Air Impact Wrench Set 1"
Weight: 28.9 lbs (14.0 kg).
Set Weight: 39.7 lbs (18.0 kg).
Product Size: Refer to the images.
Storage Case Outer Dimensions (Closed): 26.0 x 5.9 x 11.0 inches (660 x 150 x 280 mm).
Anvil Length: 8.7 inches (220 mm).
Socket insertion angle: 1 inch (25.4 mm)
Air Inlet Size: 1/2 inch PT
Recommended Air Pressure: 17.6 - 27.2 lbs (8 - 12 kgf/cm2).
Maximum Rotation at No Load: 4,200 rpm
Maximum Torque: 2,180 Nm
This large air impact wrench is perfect for replacing tires for large trucks and buses, and disassembling and maintenance of construction machinery.
The long anvil specification allows it to be used on large vehicles such as trucks and buses.
The power can be adjusted in 3 different levels of rotation left and right rotation.
Comes with a dedicated case for easy carrying.
The D-shaped handle firmly holds the wrist when rotating, so it wont hurt your wrist.
The socket insertion angle is 1 inch (25.4 mm) and includes a steel ring to hold the socket.
Please assemble the handle by yourself.
This product requires an air compressor.
Please be sure to put 1 or 2 drops of oil into the air outlet after each use.
(Oil may leak from the exhaust when using, but it is not a problem.)
Maximum torque is an estimate, and the torque value may vary depending on conditions
Please note that there may be small cracks or dents on the case as it is imported.
Not compatible with all vehicles.
(Please make sure to check the socket size of the product.)