1. 5A overcurrent protection sensor module
2. Use the transformer to collect the AC signal, and the relay overcurrent signal output within 0-5A.
3. Pull the relay when overcurrent is overcurrent, release the relay while not over current.
4. User can control the external circuit on and off using the three ports of the relay COM, NC, and NO to achieve overcurrent protection.
5. Overcurrent signal setting critical point is adjustable.
Spec:
Features:
5A overcurrent protection sensor module
Use the transformer to collect the AC signal, realize the relay overcurrent signal output within 0-5A.
The relay will be pulled in the case of overcurrent, and the relay will be released if it is not overcurrent.
Users can use three ports of relay COM, NC, and NO, to control the external circuit on/off to achieve overcurrent protection.
The critical point of overcurrent signal setting is adjustable.
Specifications:
Type: 5A 5V Relay Module
Operating voltage: DC 5V
Working current:
Operating frequency range: 20Hz-400Hz
Output mode: Switch signal output
Maximum detection wire diameter: 0.2 in (5.2 mm)
Mounting Holes: Hole Diameter is 0.1 inch (3 mm), Hole Pitch is 2.1 inch (52.5 mm)
Operating Environment: -40°C - 85°C
Current detection range: AC 0.3A - 5A
Board Size: Approx. 38 * 44mm / 1.5 * 1.7in
Weight: approx. 27g
Package 1