Feature
●Applicable hose outer diameter: 0.4 - 1.9 inches (10 - 47
●L: 8.3 inches (210 mm)
●e:34.5mm
●W1: 1.9 inches (48 mm)
●W2: 0.5 inches (12 mm)
Description
Features:
Special tool for removing and removing spring type hose clips securing automotive cooling hoses
Can be used with plate spring type hose clips.
The teeth have a chevron edge that prevents the hose clip from slipping and falling off, and can be used in narrow or deep places.
The teeth are trapezoid shaped and can be used in any direction, vertically or horizontally.
Compatible with current vehicle conditions with increased tightening pressure for hose clips.
Optimized lever ratio, the tip opens larger and is easy to use.
From the Manufacturer
Hose Clip Pliers
The product (AE931) has been revised the lever ratio from the previous model (AE92) (refer to the image). The tip opens wider.
When compared to 1.2 inches (30 mm), the conventional (AE92) has to open the grip about 4.7 inches (120 mm), so it was difficult to operate with one hand, but the product (AE931) is about 3.5 inches (90 mm), so it can be used with one hand.(see diagram below)
The standard AE931 has a long nose shape that is easy to use even in deep places.The short vent type AE932 is compact in both grip and teeth than the standard AE931.By setting an angle of 35 degrees, you can insert it into a deep way to avoid pipes and stays.