EPS200 Smart Key Enster Engine Push-start H15.10 - H20.10RB1/RB2 series compatible products; Compatible with immobi; Smart card key included; All car immobilizer is required to install the original immobi key or smart card key *Unlock the driver door, extension of the locking wiring and retract to the car. Comes with a harness specifically for engine wiring, so you can turn on troublesome wiring. Basic Wiring: Lock wire, unlock wire, L terminal wire, foot brake wire, horn wire, turn signal wiring! This listing is for a wiring support. This product has been improved and compact; it has been made to minimize the need for wiring. This product has achieved only 5 interruptions. 2 remote controls can be used simultaneously to lock and unlock the remote while the engine is started. Start your engine from remote or away from the vehicle. (within remote control range available) When you start the remote engine, it will automatically shut off in about 18 minutes. Smart key system allows auto lock and unlock Just hold the remote to start your smart. Of course, it comes with an anti-theft system. Additional options include silence speakers, answer back features, and increased PKE radio waves. ※If you are not sure about additional options, please feel free to contact us. The actual installation process allows for trouble-free operation. This ESP200 type is sold with a wiring coupler design specifically for vehicles. Fits vehicles specified title only. If you are planning to install it outside the product title, please make sure to inquire about compatibility. ◆Basic Installation Wiring Contents◆ Coupler on ignition wire, Interrupt to lock and unlock wire, Interrupt wiring to horn wire, Interrupting wiring to brake wire, L-terminal or IG wiring ◆ About immobilizer vehicles◆ If the vehicle has immobilizer is equipped with immobilizer. Unlock method will be one of the following methods: 1. A method of removing caterpillar chips and securing them to the designated location (only applicable vehicles. 2. Please remove the caterpillar using the 556UW, etc. before installation. ◆ Multiple Communication Function Vehicle Note: This product is an automatic lock and unlock system, so it is not basically possible to install it on multi-communication vehicles. For multi-communication vehicles, installation cannot be performed unless multiple communications are cancelled. The remote control can be locked and unlocked while the engine is started. Push the push button once to step on the brake: ON, press again to ACC, press again to OFF. *If you want to stop the engine, press the push button while you step the brake. Start the engine: Automatic lock by stepping the brake, and automatic unlock function when the engine is turned off without the remote control key and the brake is turned on at the same time as the engine stops. Function List: Automatic detection lock, unlock system functions; Engine start and stop function; Remote control enster system function; Anti-theft forced engine stop function.