Cut, flatten, and crimp all types of modular plugs without modifying the modular die set.
Description:
Non-Ratchet Type: Unlock the closed lock to open the handle.
Ratchet Type: Grip until the handle stops and the handle will open.
1. Insert the cable between the stripper blade.
1a.Plug 4P/6P cable from the stripper tip to the stop guide (6mm strip length)
1b. Insert the 8P cable between the stripper blade and stretch the lower cut blade slightly beyond the bottom
2.Hold the handle until the handle stops, keep the cable upright and pull out from the tool.
3. Peel the round cable Insert the cable into the round stripping hole, turn the crimper counterclockwise and simultaneously insert the cable clockwise.
4. Remove the outer jacket, insert the stripped cable into the plug, make sure the wire on the left end matches the wire on the other end.
5.Place the modular plug with cable in the holder of the tool. Make sure the stripped wire is between the tab and the gold contact. Hold the handle until it stops.
6. Remove crimp plug from tool
7. During the crimping process, you can turn the ratchet screw counterclockwise to stop the wrong operation.
8. Follow step 1-3 to crimp the "DEC" plug.
Unscrew the left side of the 6P holder, insert the "DEC" plug and cable into the 6P holder, push the handle until it stops.