Our products are carefully selected before shipment and shipped to you. Buy with confidence. If you have any questions, please feel free to contact us. We will reply your message within 1 day.
If you have any product or logistics problems in time, please contact customer service, customer service will handle it for you within 24 hours!!!
Function: Simultaneous measurement of two AC voltage, voltage and current, phase, voltage, current, frequency, phase, phase order, effective power, invalid power, phase power, power ratio, trans wiring groups, phase circuit with current phase between inductive and capacity, test second circuit and bus differential protection system reads phase relationship between different protection CT, such as repair wiring and equipment. check
Power supply: DC 9V alkaline batteries (1.5V AA x 6).
Display mode: LCD display, 240 dots x 160 dots
Clamp Size: Tip Current Clamp: 0.3 x 0.5 inches (7.5 x 13 mm)
Sample Rate: About 2 times per second
Experiment Wire Length: 4.9 ft (1.5 m)
Current Clamp Length: 6.6 ft (2 m) x φ0.2 inch (
Data Hold: Press HOLD key to hold data in the "DH" symbol will be displayed
Data Storage: 1500 Sets
RS232 interface: USB-RS232 interface, download data to computer for analyzing and management
Automatic Shutdown: Automatic shutdown for about 15 minutes after launching to reduce battery consumption
Backlight: Suitable for dark or nighttime use
Working Temperature & Moisture : -10°F to 40°C, RH less than 85%
Storage temperature and moisture:-10℃ to 60℃, relative humidity below 70%
Voltage Detection: Low battery symbol is indicated to remind you of battery replacement when the battery voltage is below 7.2V.
Input Impedance: Test voltage input threat is 2MΩ
Construction: Double Insulated, Insulated Anti-Vibration Sheath