Feature(may vary by option.)
●Bearing Design
●Bearing Height: Bearing diameter from shaft determines shaft Therefore, it is equipped with high pressure P (n /mm²) that is determined by load conditions,
●Normally L/D (bearing height/bearing diameter), if appropriate, it has a ratio of 0.5 to 3, but you need to pay special attention to the high load, but after high heat situation, L/D is more appropriate
●Bearing wall: The wall thickness is compared to wall thickness, it is the main advantage of a sliding bearing with rolling bearing compared to the thickness of one thin wall
●Under normal circumstances, wall thickness t=(0.05~0.07)d =(2~5)mm
[JDB081215]
Description
Design
Type: JDB Solid No Lubrication
Material: Tin Plated
Model Size Qty.
JDB081130 8x11x30 mm 4 PCS
JDB081225 8x12x25 mm 4 PCS
JDB081230 0.3 x 1.2 inches (8 x 12 x 30 mm) 4 PCS
JDB081220 0.3 x 0.8 inches (8 x 12 x 20 mm), 4 PCS
JDB081215 8x12x15 mm 4 PCS
JDB081212 8x12x12 mm 4 PCS
JDB081210 8x12x10 mm 4 PCS
Note
1. Before assembly, the lubricant applied to the grinding parts, it can shorten the cycle of the walking process, and it will help you drive a running machine.
2. In case of refrigerated assemblies such as foreign objects and preferably unconditionally etc., the surface of the assembly should be cleaned to avoid damage to the bearing and cause deformation.
The three faces after use provide the formation of black or gray surface phenomenon for solid lubricating membrane. Dont scrub as usual.
4. Working environmental corrosive or water use, the shaft is recommended for stainless steel or chrome surfaces.
Structural properties and applications
It is supported by reinforced brass with physical performance and good ability for casting. In addition, the brass backing has a pretty good anti-corrosion ability in air, fresh and saltwater. The surface is finely machined with a witch socket on a regular basis. Specific solid lubricant is filled. This product is widely used in continuous casting and roller, mining pump, ships, steam engines, etc.