Feature(may vary by option.)

●Thickness = 12mm × Length = 25mm
●Thread part = Full thread fine [Pitch: Approx. 0.05 inch (1.25 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M10×20 (P=1.25)]

Description

■ Head shape: Button cap
Rounded head with hex hole is lower and wider than regular cap bolts. In addition, the button cap may have a slightly different head height (JIS, SS), so please check the diagram/standard chart.
Hex wrench is used for tightening, so you can apply strong torque to tighten.

■ Thread Shape: Fine [Full screw]
Finer than the nations most standard pitch (coarse) prescribed by ISO (International Organization for Standardization) standard. Compared to coarse threads, it has a shallow valley and a larger cross-section area which makes it less likely to loose. Please note that there are multiple sizes of pitch depending on the thickness of the screw. Primarily used where precision is required.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: Iron (SCM435)
It is called chrommolybdenum steel alloy for mechanical structures, and is an alloy steel with good hardening properties.
Contains Cr (chromium) for better corrosion resistance than "iron".
Stronger than "iron" or "S45C".

■Surface treatment: Chromate
Chromate-treated for corrosion resistance
Chromate coating is more corrosion resistant than unichrome It contains harmful hexavalent chromium and does not comply with RoHS directive. The alternative is trivalent white.
Shades are "Tan".