Feature

●JINBEI radio transmitter and receiver The simple structure of the shutter sync only (with X contacts only), so it is compatible with most cameras with hot shoes. The transmitter is battery operated (button type: CR2032), but the receiver is AC interrupted so there is no need to worry about running out of battery. The unique structure allows you to equip a receiver smart even with the "AC drive" or "monoblock strobes without built-in wireless receiver" such as the DII-200. Sync terminals are mini plug. Supports channels up to 16 channels and shutter speeds up to 1/250 seconds (depending on camera specifications)
●[Delivery Contents] Transmitter: 1 x Receiver: 1 x Battery not included
●[Related Product] DII-200 Easy Strobe Delicacy 200 Watts Series / TR-A9-R JINBEI Radio Transmitter / Receiver for TR-A9 - Transmitter not included / TR-RV JINBEI TR System Dedicated Receiver (for 3.5mm mini jack) *Transmitter is not included
●Note: This product is a device for the DII-200 Easy Strobe Delicacy 200 Ws Series. Other strobes have not been verified and will not be able to support after purchase. Please acknowledge
●Not for use with cameras without X contact, such as Canon EOS Kiss X10, X90, R50. Please note:


Description

[How to use]
1. Set the button battery on the transmitter.
2. Connect the power cord and sync cable that extends from the receiver to the strobe, and connect the power cord to the receiver.
3. Make sure the channel of the transmitter and receiver matches (do not work with the DIP switch in half-position)
4.Press and hold the transmitter test button to turn on the power (red pilot lamp on the top of the transmitter will light up once)
5. Turn on the strobe, press the test button on the transmitter to confirm the tunation (Green pilot lamp on the top of the transmitter and the red pilot lamp on the receiver will only light up for the same moment).
6. Set the transmitter securely to the hot shoe adapter on the top of the camera and start shooting.


[Does it malfunction? If you think it]
Q. Transmitter pilot lamp will not light up
A. Please check the battery capacity and battery set status.

Q. Receiver pilot lamp will not light up
A. Make sure the strobe is on or if the channel is matching with the transmitter.

Q. The receiver pilot lamp will not light up after confirming above
A. To avoid signal interference, please change the channel both transmitter and receiver.

Q. The pilot lamp on the transmitter will light up but the strobe will not light up.
A. Make sure that the synchronous code extending from the receiver is securely connected to the strobe.

Q. After connecting the camera: The pilot lamp of the transmitter and receiver will light up, but the strobe will not light up.
A. Please activate the external strobe in the camera side settings. Please check your cameras manual for more details.

If there is no operation for a certain time, the remote control will automatically turn off.
The number of channels cannot be displayed on the remote control. At present, the channel setting is provided by a dip switch combination.
When using this product with a camera that can capture live view (LV), please set the "LV silent photography" to "None". When "LV Quiet Photography" is set to "Mode 1" and "Mode 2", the strobe will not glow when shooting in live view (it will glow when shooting in the viewfinder).
Cannot be used with cameras that do not have X contacts on the hot shoe. Please note:


Specifications:
Functions: Sync, auto power off.
Channel setting: DIP switch manual setting (no channel number)
Maximum tuning speed: 1/250 seconds (based on camera specifications)
Channels: 16 channels (0 - 15)
Power supply (transmitter): Button battery (CR2032)
Power supply (receiver): AC 100 V, 50/60 Hz
Radio Range: Approx. 65.6 ft (20 m)
Sync terminal: Mini plug.
Sync Cable Length: 8.7 inches (220 mm)
Transmitter Weight: Approx. 0.9 oz (25 g) (including batteries)
Transmitter dimensions: 2.6 x 1.0 inches (65 x 25 mm) (including protrusions).
Receiver Weight: Approx. 1.9 oz (55 g).
Receiver dimensions: 3.0 x 1.8 x 1.1 inches (75 x 45 x 27 mm) (including protrusions).