Feature

●Model Number: 42 stepper motor 17HS3401.
●Holding torque: 28N.cm Braking torque: 1.6N.cm.
●当社の 3D プリンター部品がお使いの 3D プリンターと互換性があることを確認してください。
●ご不明な場合は、まずお問い合わせください。適合するかどうかを確認させていただきます。
●3Dプリンター部品を多数取り揃えておりますので、お気軽にお問い合わせください。 ありがとう。 当社は最高品質の製品と最高の顧客体験を提供するよう努めています。


Description

Model: 17HS3401

Basic motor parameters:
Step angle: 1.8° Phase current: 1.3A
Phase resistance: 2.4 ohms Phase inductance: 2.8mH
Holding torque: 28N.cm Braking torque: 1.6N.cm
Rotor inertia: 34g.cm2 Number of leads: 4
Motor weight: 220g body length: 34mm
Step angular accuracy:士5% (full step, no load)
Resistance accuracy: +10%
Inductance accuracy: +20%
Temperature rise: 80 degrees C Max.
Operating ambient temperature: -20 - 50 degrees Celsius
Insulation resistance: 100M Euro Min 500VDC
Electrical strength: 820VAC one minute
Radial clearance: 0.02Max (450g load)
Axial clearance: 0.08Max (450g load)
Adapter driver: two-phase stepper driver