Feature(may vary by option.)
●Type A Bracket
●Actual Dimensions: 18.0 inches (457 mm) (+0.3 inches (7 mm) included) for left side
●Arm bracket up angle: 0.75 degree
●Required for use with A-32 (right side)
●The shelf board is fixed in the assumption that there is no need to shake it off (you will need to choose either a simple fixed dowel type or a screw stopper by WT-P)
●Cannot be used with RKY unless a simple fixed dowel type is used.)
[450mm For Left Side A-33]
Description
The slit hole-mounted shelves and other mounting system is designed for wooden shelves, and wood brackets.
From the Manufacturer
A-33 Wood Bracket
Features
Slit hole mount for wooden shelves.Wood Brackets
Please note that this product cannot be used with anti-shedding (RKY or RPK).However, for simple fixation dowels can only be used with RKY only.
Precautions
Design requirement: The estimated weight of the shelf supports may vary depending on the opponent.Please choose the right product when considering the weight of the displayed product from the design stage.
Design Note: The fixing method of wooden shelves is available in 3 ways by using direct tapping screws, (simple) fixing dowels and fixing dowels.Please consider each of the ways that are suitable for the purpose of use.The screws on the wooden shelf supports hold the nails, and depending on the accuracy, it may be difficult to move up and down the shelf.We recommend a dowel for simple fixation in order to make it movable.Please do not use shelves that protrude far from the shelf carrier.If a load is placed on the tip, it may cause a rear bounce.(especially when securing with simple fixed dowels) When using the level level extension hardware (LW) inside, please use a shelf board with a minimum of 1.3 inches (32 mm) depth than the effective shelf shelf.(If less than 1.3 inches (32 mm), the L metal fittings will protrude in the front.)
Product Specifications
- For wood shelves only.
- Material: Steel special steel.
- Thickness: t = 2.6mm
- 0.75° UP
- Similar stainless steel products (No. 7600).
- Cannot be used with RKY or RPK